Il Coffin Corner, o Q-Corner, rappresenta la condizione estrema dell’inviluppo di volo in alta quota, in cui la velocità di stallo e il limite imposto dal numero di Mach critico si avvicinano fino a coincidere, riducendo al minimo la finestra di velocità disponibile.
A quote medio-basse il pilota dispone di un ampio margine: la velocità di stallo rimane praticamente costante se espressa in IAS, mentre il limite superiore, rappresentato da Vmo o da Mmo, è ben distante. In alta quota la situazione cambia radicalmente. L’effetto della compressibilità riduce il coefficiente di portanza massimo (CLmax), provocando un aumento della velocità di stallo in termini di IAS. Parallelamente, il limite di Mach critico, se convertito in IAS, si abbassa progressivamente poiché a Mach costante la velocità indicata decresce con l’aumentare della quota.(vedi articoli procedenti sul comportamento delle varie velocità in funzione della quota)
Il risultato è la progressiva riduzione della distanza tra low speed buffet e high speed buffet. Al di sotto della finestra utile l’aereo manifesta vibrazioni dovute all’imminente stallo per eccesso di angolo d’incidenza; al di sopra si verificano fenomeni legati alle onde d’urto e alla separazione del flusso. La differenza tra i due limiti prende il nome di buffet margin e può ridursi anche a soli 15–20 nodi.
Il Coffin Corner è l’apice superiore di questo triangolo: il punto in cui la velocità di stallo e quella critica di Mach si incontrano. In questa condizione l’aereo non dispone più di margini. Rallentare significa entrare nello stallo, accelerare significa superare Mach critico.
⸻
Una condizione instabile
Volare vicino al Coffin Corner significa operare su un filo sottilissimo. Basta una variazione minima di velocità, una turbolenza o una manovra con incremento di load factor per superare simultaneamente entrambi i limiti. Una virata di circa 39°, ad esempio, incrementa il fattore di carico del 30% e con esso la velocità di stallo: in alta quota questo è sufficiente a spingere l’aereo nel buffet da bassa velocità pur restando in un regime apparentemente sicuro.
Sul versante opposto, eccedere la velocità critica porta al cosiddetto shock stall, con separazione del flusso e possibile tuck under, cioè una tendenza a picchiare violentemente con perdita di quota.
⸻
Implicazioni operative
Per un jet di linea, il margine tra stallo e Mach critico si riduce progressivamente con la salita, fino a diventare minimo attorno ai livelli più alti di crociera. È per questo che i manuali operativi e i sistemi di bordo (FMS) stabiliscono sempre una quota massima operativa inferiore al limite teorico.
Tuttavia, peso elevato, temperature non standard o presenza di jet streams possono ridurre ulteriormente il margine. In queste condizioni, l’unica via di uscita reale è scendere di quota, riportandosi in un’area dell’inviluppo dove la velocità di stallo torna a valori più bassi e il limite di Mach in IAS torna a valori più alti.
⸻
Il Coffin Corner è la zona critica in cui l’aereo non ha più margini tra stallo e Mach critico. È l’apice superiore dell’inviluppo, un settore in cui la minima deviazione porta inevitabilmente a superare uno dei due limiti.
Il nome, “angolo della bara”, riflette la pericolosità della condizione: un vicolo cieco aerodinamico da cui non si esce con nessuna manovra, se non con la discesa.
📌 Nota a margine
In alcuni testi si trova la descrizione del Coffin Corner come il punto in cui “lo stallo di bassa velocità incontra lo stallo di alta velocità”. Si tratta di una semplificazione fuorviante: lo stallo non dipende dalla velocità, ma dal raggiungimento dell’angolo d’incidenza critico. La confusione nasce dal fatto che, poco prima dello stallo, l’aereo entra in low speed buffet, mentre vicino al Mach critico compare l’high speed buffet. Entrambi si manifestano come vibrazioni della cellula e per questo, nel tempo, sono stati impropriamente assimilati a due differenti “stalli”. In realtà, il Coffin Corner rappresenta la condizione in cui questi due fenomeni di buffet coincidono, riducendo a zero la finestra di velocità disponibile.
✈️ Coffin Corner
The Coffin Corner, or Q-Corner, represents the extreme condition of the flight envelope at high altitude, where the stall speed and the limit imposed by the critical Mach number converge until they nearly coincide, leaving only a minimal window of available speed.
At medium–low altitudes the pilot enjoys a wide margin: stall speed remains practically constant when expressed in IAS, while the upper limit, represented by Vmo or Mmo, is far away. At high altitude, however, the situation changes dramatically. The effect of compressibility reduces the maximum lift coefficient (CLmax), causing stall speed (in IAS) to increase. At the same time, the critical Mach limit, if converted into IAS, progressively decreases, since at constant Mach number the indicated airspeed decreases with increasing altitude (see previous articles on the behavior of speeds as a function of altitude).
The result is the progressive reduction of the distance between low-speed buffet and high-speed buffet. Below the useful speed window, the aircraft experiences vibrations due to the imminent stall from excessive angle of attack; above it, phenomena related to shock waves and flow separation occur. The difference between the two limits is called buffet margin and can shrink to as little as 15–20 knots.
The Coffin Corner is the upper apex of this triangle: the point where stall speed and the critical Mach number meet. In this condition, the aircraft has no margins left. Slowing down means entering stall, accelerating means exceeding the critical Mach number.
⸻
An unstable condition
Flying close to the Coffin Corner means operating on a razor’s edge. Even a minimal speed variation, turbulence, or a maneuver increasing load factor may exceed both limits at the same time. A turn of about 39°, for example, increases the load factor by 30%, and with it the stall speed: at high altitude this alone may push the aircraft into low-speed buffet while still apparently remaining in a safe regime.
On the opposite side, exceeding the critical Mach leads to the so-called shock stall, with flow separation and a possible tuck under, i.e. a violent nose-down tendency with loss of altitude.
⸻
Operational implications
For a jetliner, the margin between stall and critical Mach gradually narrows as it climbs, reaching a minimum around the highest cruise levels. This is why operational manuals and onboard systems (FMS) always define a maximum operational altitude below the theoretical limit.
However, high weight, non-standard temperatures, or the presence of jet streams can further reduce the margin. In these conditions, the only real escape is to descend, returning to an area of the envelope where stall speed decreases and the Mach limit in IAS increases.
⸻
The Coffin Corner is the critical zone where the aircraft has no margin left between stall and critical Mach. It is the upper apex of the flight envelope, a sector where even the slightest deviation inevitably leads to exceeding one of the two limits.
The name, “Coffin Corner,” reflects the danger of the condition: an aerodynamic dead end from which recovery is only possible by descending.
⸻
📌 Side note
In some texts, the Coffin Corner is described as the point where “low-speed stall meets high-speed stall.” This is a misleading simplification: stall does not depend on speed but on reaching the critical angle of attack. The confusion arises because, shortly before stalling, the aircraft enters low-speed buffet, while near the critical Mach high-speed buffet appears. Both manifest as airframe vibrations and have therefore, over time, been mistakenly referred to as two different “stalls.” In reality, the Coffin Corner represents the condition where these two buffet phenomena overlap, reducing the speed window to zero.
Leonardo Ricci
I contenuti del Flight Corner hanno finalità informative e didattiche. Per l'impiego operativo fanno fede la documentazione, le procedure e i riferimenti approvati e aggiornati dell'operatore e del costruttore.